Audiolab 9000P - Getting Started

Introduction of 9000P
Features
• Class AB power amplifier
• CFB (Complementary Feedback) Technology
• Stereo/Bridge (mono) operation
• 2 x 100W (8 ohms, THD <1%) / 2 x 160W (4 ohms, THD <1%)
• Auto-standby function
• Output short circuit protection
• High-temperature protection
Inputs
• One unbalanced analogue input pair
• One balanced analogue input pair
• One 12V trigger input
1: Getting Started
Page 05
Thank you for purchasing the Audiolab 9000P.
Audiolab's new 9000 Series represents a new standard in home audio for the
connoisseur, and the 9000P is no exception.
This dedicated power amplifier has been designed in line with the smart aesthetic
and exemplary performance of the 9000 series - solidly built and impeccably
finished.
Please read through this manual to obtain the very best from your 9000P.
Placement
• The Audiolab 9000P
• One IEC power cord suitable for your region
• One instruction manual
Unpacking the Equipment
The carton should contain:
The unit must be mounted on a solid, level and stable surface.
Before you connect the Audiolab 9000P to the AC mains power, ensure your AC
mains voltage corresponds to the rating on the rear panel of the product. If in
doubt, consult your dealer. If you move to an area that has a different mains
voltage, seek advice from an Audiolab appointed dealer or a competent service
technician.
If an item is missing or damaged, report this to your dealer as soon as possible.
Remain the packing for safe transport of your unit. If you dispose of the packing,
please do so with regard to any recycling regulations in your area.
Outputs
• Speaker outputs
Important
Safety Information
Getting Started
Contents
Controls and Functions
Connections
System Connection
System Operations Warranty Coverage Specification