Why does my Audiovox Car Receiver say 'No Disc'?
If your Audiovox Car Receiver displays 'No Disc', it could be due to a few reasons: * The disc might be dirty, so try cleaning it with a soft cloth. * Ensure the disc is inserted with the label side up. * Confirm that a disc is actually present in the loading compartment and insert one if it's missing.
Why does my Audiovox Car Receiver display 'Bad Disc'?
If your Audiovox Car Receiver shows 'Bad Disc', it may be because the disc is dirty. Try cleaning it with a soft cloth. Also, make sure the disc is inserted correctly, with the label side up.
Why is there no repeat or searching while playing VCD on my Audiovox Car Receiver?
If there's no repeat or searching function available while playing a VCD on your Audiovox Car Receiver, it's likely that PBC (Playback Control) is turned on. Try turning PBC off.
Why does my Audiovox Car Receiver have interruption occurred during playback?
If playback is interrupted on your Audiovox Car Receiver, it could be because the disc is dirty or scratched. Try cleaning or replacing the disc. Alternatively, the file might be damaged or a bad recording. In that case, recreate the disc with good files.
Why does my Audiovox Car Receiver say 'Unknown disc'?
If your Audiovox Car Receiver displays 'Unknown disc', it means the disc format is not compatible with the unit. Use a compatible disc instead.
Why does my Audiovox Car Receiver show a region error?
If your Audiovox Car Receiver displays a region error, it indicates that the DVD is not compatible with the unit's region code. Use a disc with the proper region code for your unit.
General| Resolution | 800 x 480 Pixels |
|---|---|
| Navigation | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Audio Formats Supported | MP3, WMA |
| DVD Player | Yes |
| SD Card Slot | Yes |
| Rear View Camera Input | Yes |
| Radio | AM/FM |
| CD Player | Yes |
| Video Output | Yes |
| Aux Input | Yes |
| Video Formats Supported | MPEG-1, MPEG-2, MPEG-4 |
Essential safety precautions and warnings for the unit's operation and installation.
Explains the function of each button, connector, and slot on the device.
How to load, play, and eject discs, and control playback.
How to connect, insert, and play media from USB devices and SD/MMC cards.
Steps to connect a Bluetooth-enabled phone or device to the unit.
How to initiate phone calls and manage incoming calls using Bluetooth.
Steps for selecting language, accepting EULA, and configuring basic settings.
Methods to find and select a destination using address, POI, history, or map.
Solutions for power, audio output, sound quality, distortion, and unit resets.
Troubleshooting for display issues, interference, and weak station searching.
Solutions for discs not playing, blurred images, PBC errors, and disc errors.
To Next Page
