14
All of the SWC buttons were successfully programmed, but 1 or more
of the buttons do not work.
If 2 or more of the resistors in the steering wheel have resistance values that are
too close to one another, the radio may register the dierent buttons as the same
button, overwriting 1 or more of the programmed functions. If the radio is unable to
distinguish 2 or more buttons, either the resistors in the steering wheel will need to
be changed to more distinct values; or a SWC adaptor will be required.
Color LED
Tap the ColorLED icon to make adjustments to the I◄◄ & ►►I
button backlighting.
• To active the I◄◄ & ►►I button backlighting when the vehicles lights turn on;
connect the illumination wire to 12V.
• To active the I◄◄ & ►►I button backlighting at all times; go to the Settings icon
on the second Home page, then select General.
Under the Headlight Switch heading, select o.
To Next Page
Loading...