EasyManua.ls Logo

AUMA ACE C 01.2 Profinet Series - Page 69

AUMA ACE C 01.2 Profinet Series
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ExplanationSetting valueDefaultAccessParametersTypeID
Min = 00R/W
No.Torque-
CurvesClose
S205238PRM
Max = 65535
Interval position-time
Min = 1 [s]10R/W
Interval position-time
U164032PRM
Max = 3600 [s]
Table 86: Asset Management > Device temperatures
ExplanationSetting valueDefaultAc-
cess
ParametersTypeID
Data length = 8 bytes
Temperature of actuator con-
trols
Min = -60 [°C]R
Temp. controls
I164PZD
Max = 150 [°C]
Mean value of temperature in-
formation of logic sub-assembly
Min = -100 °C]R
Temp mean value logic
I165171PRM
Max = 150 [°C]
Temperature of the control unit
Min = -60 [°C]R
Temp. control unit
I16109PZD
Max = 150 [°C]
Mean value of temperature in-
formation of optional MWG sub-
assembly
Min = -100 [°C]R
Temp mean value
MWG
I165174PRM
Max = 150 [°C]
Table 87: Asset Management > Controls version
ExplanationSetting valueDefaultAc-
cess
ParametersTypeID
Data length = 6 bytes
Version for explosion-proof ap-
plications
0: Off
0R
Ex version
enum3156PRM
1: On
Version for applications with hy-
draulic actuators
0: Schuck
0R
Hydraulic version
enum5055PRM
1: Ledeen
Version for SIL applications0: Off
0R
SIL version
enum4437PRM
1: On
Table 88: Asset Management > Hardware equipment
ExplanationSetting valueDefaultAccessParametersTypeID
Data length = 46 bytes
Target configuration of 'LC'
(Local Controls/ A9) electronics
sub-assembly
0: Not available
1R
LC (target)
enum182PRM
1: Available
'LC' (Local Controls) electronics
sub-assembly (A9)
0: Not available
0R
LC
enum602PRM
1: Available
'Logic' (target configuration)
electronics sub-assembly (A2)
0: Not available
1R
Logic (target)
enum178PRM
1: Available
'Logic' electronics sub-assembly
(A2)
0: Not available
0R
Logic
enum598PRM
1: Available
Target configuration of position
transmitter
0: None
1R
Pos. transm. (target)
enum2755PRM
1: Potentiometer
2: RWG
4: MWG
Type of position transmitter
used
0: None
0R
Position transmitter
enum853PRM
1: Potentiometer
2: RWG
4: MWG
Target configuration of 'MCM'
(Motor Control and Monitoring /
A52) electronics sub-assembly
0: Not available
1R
MCM (target)
enum2337PRM
1: Available
69
Actuator controls
AC 01.2/ACExC 01.2 Profinet Appendix

Related product manuals