AUMA SAR 10.2 - Page 94

Please state device type and our order number (see name plate) when ordering spare parts. Only original AUMA spare parts should be used.
Failure to use original spare parts voids the warranty and exempts AUMA from any liability. Representation of spare parts may slightly vary
from actual delivery.
TypeDesignationRef. no.
Sub-assemblyHousing001.0
Sub-assemblyLocal controls002.0
Sub-assemblyLocal controls board002.3
Face plate for display002.4
Sub-assemblyPower supply unit006.0
Fieldbus board008.1
Sub-assemblyLogic board009.0
Sub-assemblyRelay board011.1
Option board012.0
Sub-assemblySocket carrier (complete with sockets)501.0
Sub-assemblyPin carrier without pins502.0
Sub-assemblySocket for control503.0
Sub-assemblySocket for motor504.0
Sub-assemblyPin for controls505.0
Sub-assemblyPin for motor506.0
Sub-assemblyFrame for electrical connection507.1
Sub-assemblySwitchgear508.0
Sub-assemblyPadlock509.1
KitFuse kit510.0
Sub-assemblyTerminal frame (without terminals)528.0
Cover611.0
Modbus TCP/IP Gateway626.0
EtherNet/IP module668.0
Cover607.0
SetSeal kitS
94
SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2 Control unit: electronic (MWG)
Spare parts AC 01.2 Non-Intrusive EtherNet/IP