Need help?Do you have a question about the AUMA SAR 07.5 and is the answer not in the manual?
General| Brand | AUMA |
|---|---|
| Model | SAR 07.5 |
| Category | Controller |
| Language | English |
General safety principles, directives, and standards compliance.
Explanation of warning symbols (DANGER, WARNING, CAUTION, NOTICE).
Steps for mounting the actuator to a valve or gearbox.
Fundamental principles and warnings for electrical connection.
Guide for connecting the actuator via the AUMA plug/socket connector.
Procedures and safety measures for connecting cables.
Instructions for connecting Modbus bus cables correctly.
How to operate the actuator manually for setting or in case of failure.
Steps to engage the manual operation mode.
Steps to disengage manual operation and return to motor operation.
Operating the actuator using the electric motor.
Operating the actuator using the local controls' push buttons.
Operating the actuator remotely via a fieldbus interface.
Using push buttons to navigate menus and settings on the display.
Process for entering the password to access settings.
How operation states, faults, and warnings are indicated on the display.
Detailed explanation of operation status displays (LOCAL, REMOTE etc.).
Meaning and function of the indicator lights on the local controls.
Configuring Modbus communication parameters (Baud Rate, Parity, Slave Address).
Performing functional tests after commissioning settings.
Troubleshooting common faults encountered during commissioning.
Understanding and interpreting fault and warning messages on the display.
Essential checks for safe operation and maintenance tasks.
Specifications and capabilities of the multi-turn actuator.
Specifications and functions of the AUMATIC actuator controls.
To Next Page
