Need help?Do you have a question about the AUMA SAR 12 and is the answer not in the manual?
Designation for Open-Close and Regulating duty Auma Norm actuators.
Designation for explosion-proof actuators in Norm and Compact versions.
Explains the open-loop operation for end-position control.
Describes closed-loop operation for continuous valve control.
How torque switches stop the actuator when preset torque is reached.
Details micro switches, their types, and electrical ratings.
Explains thermo switches and PTC thermistors for motor protection.
Details SAR actuators, their differences from SA, and selection points.
Explains the control loop and signal flow for regulating duty.
Details potentiometer sensors and RWG 1001/2002 transducers.
Describes IWG 1002 and IWG 1003 for inductive position sensing.
Explains the CU01 as a three-level positioner for actuator regulation.
Details IP67 and IP68 protection levels against dust and water.
Specifies operating temperature ranges and expected life time in cycles.
Lists explosion proof Norm models for open-close and regulating duty.
Lists explosion proof Compact models for open-close and regulating duty.
General| Housing material | Aluminium |
|---|---|
| Display | LCD with backlight |
| Suitable for AUMA Actuator Types | SA, SAR, SQ, SQR |
| Voltage | 24V DC, 230 V AC |
| Communication interfaces | Profibus DP, Modbus RTU, Ethernet |
| Power supply | 24V DC |
| Communication | Fieldbus communication |
To Next Page
