AUMA SQEx 12.2 Operation Instructions

Figure 50: Function check
For further information, please also refer to <Corrective action>.
Maintenance required (S0010)
The S0010 indication shows maintenance indications according to NAMUR
recommendation NE 107.
If such an indication has occurred, the display shows S0010:
●
the number of indications occurred
●
a blinking square with an oilcan after approx. 3 seconds
Figure 51: Maintenance required
For further information, please also refer to <Corrective action>.
Failure (S0011)
The S0011 indication shows the causes of the failure indication according to NAMUR
recommendation NE 107.
If such an indication has occurred, the display shows S0011:
●
the number of indications occurred
●
a blinking circle with a cross after approx. 3 seconds
Figure 52: Failure
For further information, please also refer to <Corrective action>.
42
SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2 Control unit: electronic (MWG)
Indications ACExC 01.2 Non-Intrusive Modbus TCP/IP

AUMA SQEx 12.2 Specifications

General

Brand	AUMA
Model	SQEx 12.2
Category	Controller
Language	English