AUMA SQR 05.2-F05 User Manual

236. Operation................................................................................................................................
236.1. Manual operation
236.1.1. Manual operation: engage
236.1.2. Manual operation: disengage
236.2. Motor operation
236.2.1. Local actuator operation
246.2.2. Actuator operation from remote
246.3. Menu navigation via push buttons (for settings and indications)
256.3.1. Menu layout and navigation
266.4. User level, password
276.4.1. Password entry
276.4.2. Password change
286.5. Language in the display
286.5.1. Language change
307. Indications..............................................................................................................................
307.1. Indications during commissioning
307.2. Indications in the display
317.2.1. Feedback indications from actuator and valve
347.2.2. Status indications according to AUMA classification
357.2.3. Status indications according to NAMUR recommendation
367.3. Mechanical position indicator/running indication
377.4. Indication lights
388. Signals.....................................................................................................................................
388.1. Status signals via output contacts (digital outputs)
388.1.1. Assignment of outputs
388.1.2. Encoding of outputs
388.2. Analogue signals
399. Commissioning (basic settings)...........................................................................................
399.1. End stops in part-turn actuator
409.1.1. End stop CLOSED: set
409.1.2. End stop OPEN: set
419.2. Type of seating: set
429.3. Torque switching: set
449.4. Limit switching: set
459.5. Test run
469.5.1. Direction of rotation: check
469.5.2. Limit switching: check
469.6. Switch compartment: open
479.7. Mechanical position indicator: set
479.8. Switch compartment: close
4910. Corrective action....................................................................................................................
4910.1. Faults during commissioning
4910.2. Fault indications and warning indications
5210.3. Fuses
5210.3.1. Fuses within the actuator controls
5310.3.2. Motor protection (thermal monitoring)
5511. Servicing and maintenance...................................................................................................
5511.1. Preventive measures for servicing and safe operation
3
SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Table of contents

AUMA SQR 05.2-F05 Specifications

General

Brand	AUMA
Model	SQR 05.2-F05
Category	Controller
Language	English