Aurora AU808MA - Shredder Maintenance; Oiling the Shredder Blades; Cleaning and Care

8 ENGLISH
 Warning: Failure to properly maintain your shredder will void the warranty.
 Oiltheshredderbladeseverymonthwithbasicvegetable,cookingoilorshredderoil.Followoiling
procedurebelow(FIGURE3).Ithelpstokeeptheshredderbladesoperatingwellovermanyyearsof
use.
Oiling procedure:
1. Turn off shredder.
2.Applyshredderoilacrossfeedslot.
3.Turnshredderinreversemodefor3~5seconds.
Note: Shredder oil is NOT included.
• Do not spray or keep any aerosol products
in or around shredder.
• DO NOT USE CANNED AIR ON SHREDDER.
 CLEANING:
•Neveruseanythingflammabletocleantheshredder.Thismayresultinseriousinjuryor
damagetotheproduct.
•ALWAYSUNPLUGTHESHREDDERBEFORECLEANING!
•Onlycleantheshredderbycarefullywipingtheunitwithadrysoftclothortowel.
•Donotcleanorimmerseshredderinwater.Havingtheunitwetmayresultindamageor
malfunctiontotheelectricalcomponents.Iftheshredderhappenstogetwet,besuretocompletely
drytheunitimmediatelywithaclothortowel.
Shredder
Oil
DO NOT USE
AEROSOL PRODUCTS!
FIGURE 3
MAINTENANCE
!
Caution: