AUTEC Dynamic+ Series - Brief Product Presentation; Series, Radio Remote Control and Unit

2 Brief product presentation
2.1 Series, Radio Remote Control and Unit
The object of this part of the Manual is the Autec Dynamic+ series Radio Remote Control
(see chapter 4).
Autec Dynamic+ series' Radio Remote Controls are designed to be used on Machines and
provide a command interface to their command and control system, to be used from an
appropriate distance and position.
Dynamic+ series' Radio Remote Controls are made of a Transmitting Unit and a Receiving
Unit: the single Units, their commands and their features are illustrated in the speci󰘰c parts
in the Manual and in the Technical Data Sheet.
The Dynamic+ series consists of two Transmitting Units, DJM and DJR, and one Receiving
Unit, CRD.
DJM DJR
CRD
12
LIUDTH000_eng-01
Brief product presentation
AUTEC - Dynamic+ series