AUTEC Dynamic+ Series User Manual

11 Decommissioning and disposal
11.1 Decommissioning
If you want to remove the Receiving Unit from the Machine:
- make sure that the Receiving Unit and the Machine are not powered,
- remove all electrical connections between the Receiving Unit and the Machine.
If you want to store the Radio Remote Control after it has been decommissioned, follow the
directions provided in chapter 5.
11.2 Disposal
When disposing of a Radio Remote Control, its components must be managed as separate
waste. When disposing of a Radio Remote Control, please comply with the provisions and/
or the regulations in force in the country where it is used.
AUTEC - Dynamic+ series
Decommissioning and disposal 49
LIUDTH000_eng-01

AUTEC Dynamic+ Series Specifications

General

Brand	AUTEC
Model	Dynamic+ Series
Category	Remote Control
Language	English