AUTEC Dynamic+ Series - Page 20

The stop function by means of Radio Remote Control is available only if the Radio
Remote Control is started up (see "Starting up the Radio Remote Control" in the
"Part C" of the Manual).
Never leave the Transmitting Unit unguarded in order to avoid uncertainty
about the availability or unavailability of the stop function.
The “life time”, as de󰄈ned in international standards and requirements, of
the stop function is 20 years. In any case, the Radio Remote Control must
be replaced within this period. The “life time” must not be considered as
a warranty period.
After the activation of the STOP on the Transmitting Unit, the Machine is
not controlled by the Radio Remote Control any more. Any possible risks
that may arise from the activation of the stop function must be taken into
account by the Installer and the User of the Radio Remote Control, and by
the Manufacturer and the Owner of the Machine where the Radio Remote
Control is installed.
20
LIUDTH000_eng-01
Radio Remote Control features
AUTEC - Dynamic+ series