AUTEC LK NEO 10 DF User Manual

Signal Meaning
The green [B] and red [A] LEDs are
steady on during start up.
A wrong "Key ID 0-1" or "ID internal tx memory" has been
inserted in the Transmitting Unit, or this is a "BACK-UP
UNIT".
The green [B] and red [A] LEDs
blink 3 times per second during
start up.
The "Key ID 0-1" or the "ID internal tx memory" is
damaged.
The green LED [B] is lit with a
steady light and the red LED [A]
blinks two times per second during
start up.
The START pushbutton is activated.
The green [B] and red [A] LEDs
blink alternating.
30 s left before the Transmitting Unit automatically
switches o󰘯.
The green LED [B] repeats the
sequence: 3 blinks and a pause,
and the red LED [A] is steady on
during start up.
The UNPAIR procedure has been carried out.
22
LIULK1ES0_eng-01
Light signals
AUTEC - Air series

AUTEC LK NEO 10 DF Specifications

General

Brand	AUTEC
Model	LK NEO 10 DF
Category	Transmitter
Language	English