Autel MaxiBAS BT608 - Power Sources

5
Table 2-1 Power LED Description
LED
Color
Description
Power
Green
 Lights solid green when the battery is fully
charged.
 Flashes green while charging, and the
tester will automatically powers on.
Red
 Lights red when the tester is powered on
and the battery level is below 15%.
 Lights red when illegal operation is
detected.
2.1.2 Power Sources
The BT608 tester can receive power from the following sources:
 Internal Battery Pack
 AC/DC Power Supply
IMPORTANT
Do not charge the battery when the temperature is below 0°C (32°F) or above
45°C (113°F).
Internal Battery Pack
The BT608 is powered via its internal rechargeable battery, which can
provide sufficient power for about 6 hours of continuous operation if fully
charged.
AC/DC Power Supply — using power adapter
The tester can be powered via an electrical outlet using the AC/DC power
adapter. The AC/DC power supply also charges the internal battery pack.