25
Out-Vehicle Test
Out-vehicle Test is used to test the condition of batteries that are not connected
to a vehicle. This function aims to check the health status of the battery only.
The compatible battery types and standards are as follows:
Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL
Standards: CCA, SAE, CA, EN, EN2, IEC, DIN, JIS, MCA, BCI, and GB
5.1 Test Procedure
1. Connect the tester clamps to the battery terminals.
2. Select the appropriate battery type, rating standard, and CCA value. Tap
Start Testing to start the test.
Figure 5-1 Sample Out-vehicle Test Screen
3. The test results will display in a few seconds.
To Next Page
Loading...
