35
Function Buttons
A brief description of the operations of the Auto Scan Function Buttons are
displayed in the table below.
Table 8-2 Auto Scan Function Buttons
Saves the scanning results as a PDF document.
Displays the diagnostic data in report form.
Deletes codes. A warning message will display to alert user of
possible data loss when this function is selected.
Confirms the test results. Continues with the system diagnosis
after the desired system is selected by tapping the item in the
Main Section.
Suspends scanning. Tap Continue to resume.
Returns to the previous screen or exits Auto Scan.
8.2 Control Units
Select to directly locate a desired control system for testing. Follow the menu-
driven procedures and make proper selection; the application guides the user to
the proper diagnostic function menu based on these selections.
To Next Page
Loading...
