51
NOTE
Thermal Paper
The internal printer is shipped with two rolls of thermal paper (2.3’’ wide by 0.98’’
in diameter). Replacement rolls are available in most stationery stores.
To replace the paper roll:
1. Open the cover of the printer by gently lifting it upwards.
2. Remove the spent roll if any.
3. Insert a new paper roll.
4. Pull the paper out past the cutter at the front of the printer. While doing so,
make sure that the paper roll stays taut and doesn’t unroll.
5. Push the cover down to snap it closed. For a clean tear, pull the paper along
the serrated edge.
To Next Page
Loading...
