B. To Set Speed Limit
To make the TIME OVER SPEED data in VBB valid, you need
to set a speed limit for the vehicle being tested.
1) Use the button next to LIMITED.
ADJUST
◄LIMITED
2) Use the button next to “-” or “+” to adjust in 1KPH(MPH)
step or use the button next to “+10” to change in 10
KPH(MPH) step till the limit reaches your desired one and
press SAVE button.
- 80KPH +
◄ +10 SAVE►
2.9 Tool Information
This function is used to view software version of the tool and
look up unit conversions between metric and English unit of
measure.
1) Press
twice from home screen.
SPEED DISPLAY►
◄ABOUT DEFAULT►
2) Use the button next to ABOUT.
VERSION
◄CONVERSION
3) Press the button next to VERSION to view software version
on screen.
Version 1. 0 2008
Autel Maxitrip
4) Press
to exit.
16
To Next Page
Loading...