42 © 2000 Directed Electronics, Inc. Vista, CA
transmitter configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations by using the
Auto Learn functions in the Transmitter/Receiver Learn Routine.
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan-
dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When
programmed for standard configuration, the transmitter buttons are assigned to the following functions:
...............................operates...........................Arm only
..............................operates...........................Disarm only
..............................operates...........................Channel 2
..............................operates...........................Panic
and ...........operate............................Remote Start
and ...........operate ..........................Channel 4
The standard configuration also allows the user to utilize Multi-Level Security Arming (described in the follow-
ing section), a feature that cannot be accessed from a single button arm/disarm configuration transmitter.
When programmed for single button arm/disarm configuration, the transmitter buttons are assigned to the fol-
lowing functions:
..............................operates...........................Arm/Disarm/Panic
..............................operates...........................Channel 2
..............................operates...........................Remote Start
..............................operates...........................Channel 4
single button arm/disarm configuration
standard configuration
To Next Page
Loading...