For more information visit www.auto-trail.co.uk 44
BODY MOUNTING
WINDOWS
EXTERNAL DOORS
INTERNAL DOORS
BODY ATTACHMENTS
CHASSIS ATTACHMENTS
INTERIOR
GAS SYSTEMS
WATER SYSTEM
ELECTRICAL SYSTEM
CHASSIS ATTACHMENTS
Folding step (if applicable)
Check the step pivots for satisfactory
operation or signs of wear. Check that
the retaining mechanisms hold the step
securely when closed. If a warning light is
fitted, check that the switch is working.
Water tank mountings
Check that the mounting frames are fixed
securely to the body. Check that any tank
release fastenings are free from rust and
corrosion, and they operate smoothly. If
necessary, remove rust with a wire brush,
treat with a rust inhibiting solution and
lubricate joints.
Spare wheel
Remove spare wheel and check for
damage. Check tyre pressure. Check that
the mounting is securely attached to the
body. Check for satisfactory spare wheel
retention.
INTERIOR
Body seepage
Examine for signs of moisture staining in areas under
windows, sides of roof and in corners, which might
indicate water seepage. Use a moisture meter if
unsure.
Furniture
Check that all furniture is securely fixed. Make sure
that the door hinges, catches and stays operate
smoothly.
Dinette seats and bed
Check seat bases for signs of damage and ensure fixings are
secure. Make up the beds according to the manufacturer's
instructions and check for rigidity and safety.
Curtains, blinds and nets
Check that the tracks are secure and without
movement. Check that the curtains draw freely without
snagging. Check the operation of the blinds and/or nets.
Check the fly screens in the skylights and air vents.
Cab seats
Where cab seats form part of the living area and/or bed
layout, check that they are attached securely. Make
sure that the seat slides, swivels and seat backs operate
smoothly and easily.
Fire extinguisher
Check the condition and expiry date. If the date has
expired of the extinguisher is partly exhausted, replace.
To Next Page
Loading...
