7 TOGETHER WE’RE GOING PLACES
100w solar panel (if fitted)
Gas locker
Water/waste tank
PREPARING FOR THE ROAD
EXTERNAL FEATURES
Instructions on how to change a wheel
• Ensure handbrake is fully applied and use wheel chocks if necessary to ensure the vehicle cannot move.
• Remove the wheel trims (if fitted). Use the wheel-brace to slacken o wheel nuts on the wheel to be changed.
• Position the jack under the axle or at the appropriate jacking point.
• Jack up the vehicle until the wheel to be changed is just o the ground.
• Remove the wheel nuts and wheel.
• Fit the spare wheel and reverse the above procedure.
• Tighten all nuts equally to the required torque setting.
To Next Page
Loading...
