112
3) IGNITION OF APPLIANCES WiTH
THERMOSTAT
Proceed according to paragraphs 1 and 2, with
or without electronic ignition. The ignition
position is obtained by turning control knob on
a position between 1and 6 for the oven and
grill position (see symbol tttt)
For ovens with thermostat the different
positions of the knob correspond to the
following temperatures in °C of the oven
IMPORTANTIfignitionisunsuccessful,repeat
operationfrombeginning;ifnecessary.have
the appliance checked if a gas and/or electricity
failure in the appliance. If appliance absolutely
does not work, close gas inlet tap and contact
retailer. Before using oven for the first lime,
let it run at maximum temperature for the
duration of 1/2 hour without foodstuffs inside:
“USE GLOVES WHEN HANDUNG HOT
ELEMENTS!”
In the event of the burner flames being
accidentally extinguished, turn off the burner
control and do not attempt re-ignite the
burner for at least 1 min.
OPERATION OF THE GRILL
a) Pull out heat protection plate “P” (fig. 5)
b) Light grill burner.
c) Keep oven door half-open (fig. 5).
USE OF THE ROTISSERIE
Insert dripping-pan with the rotisserie installed
as indicated in (fig 5a). Push in the appropriate
button (fig 4a) in order to set going the
rotisserie motor.
Use of the Grill
a) Slide out heat protection plate “P” (fig.’ 5)
b) Light grill burner
c) Keep oven door in half-open position (fig. 5)
Use with Oven:
a) Light oven burner
b) Position control knob on desired
temperature
c) Close oven door.
SMEV HOTPLATE
USE THE APPLIANCE ONLY IN A WELL
VENTILATED SPACE.
The ventilation openings must remain open
when the appliances are operating.
POS 1 2 3 4 5 6
TEMP 130 160 180 200 220 240
smev oven & hotplate
To Next Page
Loading...