123
To close, reverse the operation and then check
if locked into position.
With crank: To open, rotate the crank until a
resistance is noticeable during the operation.
To close, reverse the operation and then check
if locked into position.
SEAT SWIVEL
(DRIVER/PASSENGER)
To turn the swivel, slide the BLACK lever rearwards
and adjust to the required angle. Before driving
off ensure the locking mechanism is fully secure.
BLIND AND FLYSCREEN
The blind and flyscreen operate Independently
of each other and are engaged by connecting
to each other and sliding.
Safety precautions:
1. Repairs should be carried out only by
trained personnel.
2. Inform an approved dealer in case of
defects and malfunctions.
3. Before starting off, check the rooflight
for damage in the acrylic dome (tension
cracks) and the winding mechanism
which could arise owing to, for example,
branches and other natural causes.
4. Do not step in the acrylic dome.
5. Close the roof light before starting off
(check whether it is locked).
6. Do not leave the vehicle with the rooflight
open (danger of burglary or from rain).
7. Do not open in strong wind or rain.
8. Before opening, remove snow, ice, dirt,
etc. from the acrylic dome.
9. Malfunctions are to be repaired by an
approved dealer at once.
10. Do not use caustic detergents (danger of
tension cracks in the acrylic dome).
11. Do not operate whilst the vehicle is moving.
seat swivel, blind & flyscreen
To Next Page
Loading...