126
6. Adjust them to the required height. The
fabric can be tightened by rolling up a
little.
6
Never put out the support arms that
high, that the fabric jams between the
arms and the box.
7. Fasten the support arms.
Fig. 7
8. Install the tension rafter (for 3.75 m
awning).
8
9. When raining, lower one side of the
awning in such a way that the water can
run down the fabric. Prevent the fabric
from flying up by a sudden wind blow by
using the hold down kit (optional).
9
10. The front profile locks automatically when
rolling up
10
omnistor awning
To Next Page
Loading...