EasyManua.ls Logo

AUTOLIFT F900 - Troubleshooting Common Failures

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.3 POSSIBLE FAILURES
First check that the battery level is acceptable
Failure
Ev. Cause
Solutions
1.Platform does’t get out of box
1.Hand control not working
2.Microswitcht A is not working
1.Check hand control and ev.
change it
2.Move manually the microswitch
pin
2.Platform is on the floor and
doesn’t raise
1.E-Motor Relais / Hand control
not working
2. Platform is accidentally been
pushed back in box
1. Check parts and change them
2. Push “out” or pull manually the
platform back entirely out from
box
3. Platform doesn’t lower
1. Hand control not working
2. Lowering valve is not working
1. Operate the lift manually and
change as soon as possible the
parts
4.Platform doesn’t lower and stow
from upper position
1. Microswitch D doesn’t work
pin is blocked
1.Move the Microswitch pin until it
works again
7- NEW FUEL TANK
A new vehicle tank will be built, in order to reach the necessary clearance from the ground
While refueling do not overfill the tank.
Please note that the fuel level indicator of the vehicle is not precise anymoret.
Therefore use the tachometer to calculate the total or remaining km autonomy.
This way you will prevent unexpected stops because of missing fuer and unuseful service costs
Lift “F900”

Other manuals for AUTOLIFT F900

Related product manuals