Installation Instructions Axess
®
Pro 1505 3
Automatic Technology (Australia) Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties,
statutory or otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology (Australia) Pty Ltd
industrial roller Door opener. Automatic Technology (Australia) Pty Ltd hereby further expressly excludes all or any liability for any injury, damage,
cost, expense or claim whatsoever suffered by any person as a result whether directly or indirectly from failure to install the Automatic Technology
(Australia) industrial roller Door opener in accordance with these installation instructions.
Axess
®
Pro 1505
Industrial Overhead Door Opener
WARNING: Electrical wiring must be in compliance with
your local building and electrical codes.
WARNING: It is vital for the safety of persons to follow
all instructions. Failure to comply with the installation
instructions and the safety warnings may result in serious
personal injury and/or property and remote control opener
damage. Please save these instructions for future reference.
NOTE: For full automatic operation a Safety Beam (Photo
Electric Beam Sensor) must be fitted to the logic console
with this opener. Failure to comply will void the warranty and
may cause serious personal injury and/or property damage.
18. Specifications 18
19. Troubleshooting 19
20. Maintenance 20
20.1 Door Maintenance 20
20.2 Lubrication (every 3 - 6 months) 20
20.3 Door Service and Repair 20
20.4 Opener Maintenance 20
20.5 Service Indicator 20
21. Appendix 21
A - Console Menu Structure 21
B - Viewing & Editing Logic Console Parameters 24
C - Control Board Adjustments 25
D - Diagnostic Tools 27
E - Memory Tools 28
F - Transmitter Editing 29
G - Transmitter Management 31
Warranty and Exclusion of Liability 32
Axess
®
Pro 1505
Industrial Overhead Door Opener
To Next Page
Loading...
