C2 Series User Manual Rev. 1.9
61
The C2 Cables
Cables for Power, I/O and Laser Control
C2 cable for power, I/O and laser control, custom length and connector
configuration IP64 (straight/angled), shielded
C2 cable for power, I/O and laser control, straight M12 female connector (IP64)
to straight M12 male connector (IP64), shielded, length 3m, standard
C2 cable for power, I/O and laser control, straight M12 female connector (IP64)
to straight M12 male connector (IP64), shielded, length 5m, standard
C2 cable for power, I/O and laser control, straight M12 female connector (IP64)
to straight M12 male connector (IP64), shielded, length 10m, standard
Pigtail cables:
C2 pigtail cable for power, I/O and laser control, straight M12 female connector
(IP64) on camera plug, shielded, length 3m, standard
C2 pigtail cable for power, I/O and laser control, straight M12 female connector
(IP64) on camera plug, shielded, length 5m, standard
C2 pigtail cable for power, I/O and laser control, straight M12 female connector
(IP64) on camera plug, shielded, length 10m, standard
Angles adapter cables:
C2 & C5 angled adapter cable for power, I/O and laser control, 90° angled M12
female connector (IP64) on camera plug to straight M12 male (IP64), angled
connector configuration “UP”, length 0.2m, standard
C2 & C5 angled adapter cable for power, I/O and laser control, 90° angled M12
female connector (IP64) on camera plug to straight M12 male (IP64), angled
connector configuration “DOWN”, length 0.2m, standard
To Next Page
Loading...
Need help?
General
