AutomationDirect D2-16ND3-2 - Output Module

DL205 Installation and I/O Manual, 2nd Edition
3–74
Chapter 3: I/O Wiring and Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
F2-08AD4DA-1 8-Channel Analog Current Input / 4-Channel Analog Current
Output Module
Input Channels per Module
8, single ended (one common)
Input Range
0 to 20 mA
Resolution
12, 14, 16-bit selectable
External DC Power Required
100 mA @ 18-26.4 VDC
Max. Continuous Overload
±45 mA
Input Impedance
100  0.1% 1/4W
Filter Characteristics
Active low pass, -3dB @ 80 Hz
Conversion Time
12-bit = 1.5 ms per channel
14-bit = 6 ms per channel
16-bit = 25 ms per channel
Conversion Method
Over sampling successive approximation
Accuracy vs. Temperature
±25 ppm / °C Max.
Maximum Inaccuracy
0.1% of range
Linearity Error
(End to End)
12-bit = ±2 count max. (±0.06% of range)
14-bit = ±10 count max. (±0.06% of range)
16-bit = ±20 count max. (±0.06% of range)
Monotonic with no missing codes
Full Scale Calibration Error
(not including offset error)
±0.07% of range max.
Offset Calibration Error
±0.03% of range max.
Rec. Fuse (external)
0.032A, Littelfuse Series 217 fast-acting
Base Power Required 5VDC
35 mA
Output Channels per Module
4
Output Range
4 to 20 mA
Resolution
16-bit, 0.244 mA/bit
Output Type
Current sourcing at 20 mA max.
Load Impedance
0-750 
Max. Inaccuracy
0.25% of range
Max. Full Scale Calibration
Error (not incl. offset error)
±0.075% of range max.
Max. Offset Calibration Error
±0.1% of range max.
Accuracy vs. Temperature
±25 ppm/ °C max. full scale calibration change
(± 0.0025% of range / °C)
Max. Crosstalk at DC,
50/60Hz
-70 dB, 1 LSB
NOT SUPPORTED BY D2-230 AND D2-240 CPUs.