AutomationDirect D2-16ND3-2 - Output Module

DL205 Installation and I/O Manual, 2nd Edition
3–76
Chapter 3: I/O Wiring and Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
F2-08AD4DA-2 8-Channel Analog Voltage Input / 4-Channel Analog Voltage
Output Module
Output Channels per Module
4
Output Range
0 - 5V, 0 - 10V
Resolution
0 to 5V at 15-bit, 0 to10V at 16-bit, 152 µV/bit
Output Type
Voltage sourcing/sinking at 10 mA max.
Load Impedance
>1000 
Max. Inaccuracy
0.15% of range
Max. Full Scale Calibration
Error (not incl. offset error)
±0.075% of range max.
Max. Offset Calibration Error
±0.025% of range max.
Accuracy vs. Temperature
±50 ppm/ °C max. full scale calibration change
(± 0.005% of range / °C)
Max. Crosstalk
@ DC, 50/60Hz
-70 dB, 1 LSB
Input Channels per Module
8, single ended (one common)
Input Range
0 to 10 V
Resolution
12, 14, 16-bit selectable
External DC Power Required
80 mA @ 18-26.4 VDC
Max. Continuous Overload
±100 V
Input Impedance
>10 M
Filter Characteristics
Active low pass, -3 dB @ 80Hz
Conversion Time
12-bit = 1.5 ms per channel
14-bit = 6 ms per channel
16-bit = 25 ms per channel
Conversion Method
Over sampling successive approximation
Accuracy vs. Temperature
±50 ppm / °C Max.
Maximim Inaccuracy
0.1% of range
Linearity Error (End to End)
12-bit = ±1 count max. (±0.025% of range)
14-bit = ±4 count max. (±0.025% of range)
16-bit = ±16 count max. (±0.025% of range)
Monotonic with no missing codes
Full Scale Calibration Error
(not including offset error)
±0.075% of range max.
Offset Calibration Error
±0.025% of range max.
Base Power Required 5VDC
35 mA