AutomationDirect DURAPULSE Series - Page 259

DURAPULSE AC Drive User Manual
A–19
Single-Phase Applications
Some of the line reactors are listed for use with single-phase input power. Follow
the connection diagram shown below. Make sure that terminals B1 and B2, if
present, are properly insulated before any connections are made.
WARNING: Ensure that you properly insulate terminals B1 and B2
before making any connections to single-phase power.
C1
T1
T2
T3
A2
B2*
C2
A1 L1
*B1
L2
*GS series 1-phase reactors include a B-phase winding.
*LR series 1-phase reactors do not include a B-phase winding.
Appendix A: Accessories
1st Ed. Rev. D 05/2013