DURAPULSE AC Drive User Manual
A–47
GS Drive Configuration Software
GSoft is the configuration software for the Automation Direct GS family of drives.
It is designed to allow you to connect a personal computer to drives in the GS
family, and perform a variety of functions:
• Upload/download drive configurations
• Create new drive configurations using Quick Start, Detailed, or Schematic Views
• Edit drive configurations
• Archive/store multiple drive configurations on your PC
• Trend drive operation parameters
• Tune the drive PID loop
• View real time key operating parameters
• Start/Stop drive and switch directions, provided drive is set up for remote operation
• View drive faults
• Print a schematic representation of the drive configuration
• Print a tabular report of the current drive configuration.
GSoft includes an integral help file with software instructions.
System Requirements
GSoft will run on PCs that meet the following requirements:
• Windows 95, 98, Me, NT, 2000, and XP
• Internet Explorer 4.0 or higher (for HTML help support)
• 24 Mb of available memory
• 8Mb hard drive space
• Available RS-232 serial port
GSoft requires use of a configuration cable, GS-232CBL, which is sold separately.
RS-485 communication from an RS-232 PC port requires an FA-ISOCON or compatible
converter, which is sold separately.
Appendix A: Accessories
1st Ed. Rev. D 05/2013
To Next Page
Loading...