AutomationDirect DURAPULSE Series - The DURAPULSE Digital Keypad

Chapter 3: Keypad Operation and Quickstart
3–2
The DURAPULSE Digital Keypad
The digital keypad includes a 2 line x 16 character LCD display, 5 status LED
Indicators, and 9 function keys. The diagram below shows all of the features of
the digital keypad and an overview of their functions.
LCD Display
The LCD Display shows the operation values and parameter settings of the AC drive.
LED Indicators
The RUN LED indicates the AC drive is in Run Mode.
The STOP LED indicates the AC drive is not in Run Mode.
The FWD LED indicates the AC drive is running the motor in the forward
direction.
The REV LED indicates the AC drive is running the motor in the reverse
direction.
The JOG LED indicates the AC drive is in the Jog Mode.
RUN
STOP
MTR
PSET
P
PROT
PID
V/Hz DIGT
DISP
FW
D
REV
ANLG
COMM
RUNRUN
STOP
MTR
PSET
PROT
PID
V/Hz DIGT
F
D
REV
ANLG
COMM
JOG
If the STOP key on the keypad is active and the keypad is removed, the drive will stop.
Program Key
LED Indicators
LCD Display
Up/Down Keys
Enter Key
Stop/Reset Key
Display Key
Fwd/Rev Key
Run Key
Jog Key
The lit LED Indicators
will blink when there is
a Fault or a Warning.
JOG
JOG
RUN
STOP
MTR
PSET
P
PROT
PID
V/Hz DIGT
DISP
FW
D
REV
ANLG
COMM
RUN
STOP
MTR
PSET
PROT
PID
V/Hz DIGT
F
D
REVREV
ANLG
COMM
JOG
RUN
STOP
MTR
PSET
P
PROT
PID
V/Hz DIGT
DISP
FW
D
REV
ANLG
COMM
RUN
STOP
MTR
PSET
PROT
PID
V/Hz DIGT
FWF
D
REV
ANLG
COMM
JOG
RUN
STOP
MTR
PSET
P
PROT
PID
V/Hz DIGT
DISP
FW
D
REV
ANLG
COMM
RUN
STOPSTOP
MTR
PSET
PROT
PID
V/Hz DIGT
F
D
REV
ANLG
COMM
JOG
DURAPULSE AC Drive User Manual
1st Ed. Rev. D 05/2013