Autonics CT6Y-2P series User Manual

Table of Contents 나
x © Copyright Reserved Autonics Co., Ltd.
6 Basic Operations (Counter/Timer/Communication) ............................ 37
6.1 Operations and functions ................................................................................. 37
6.1.1 Setting value change mode (Counter/Timer) ............................................. 37
6.1.2 Setting value check mode .......................................................................... 38
6.1.3 Switching display function in preset indicator ............................................. 38
6.1.4 RESET ........................................................................................................ 38
6.2 BATCH counter (only for CT6M-1P□□/CT6M-2P□□ model) ................... 38
6.2.1 BATCH counter operation .......................................................................... 39
6.2.2 BATCH counting operation ........................................................................ 39
6.2.3 BATCH output operation ............................................................................ 39
6.2.4 BATCH RESET input ................................................................................. 39
6.2.5 Example of BATCH counter ....................................................................... 40
6.3 Setting mode ................................................................................................... 41
7 Counter Mode ............................................................................................ 43
7.1 Parameter Setting ............................................................................................ 43
7.2 Input mode ...................................................................................................... 45
7.3 Output mode .................................................................................................... 48
7.4 Counter operation for indicator model ............................................................. 51
7.5 Output operation for other conditions .............................................................. 52
7.5.1 Start point ................................................................................................... 52
7.5.2 When start point value is larger than setting value,
(UP, UP-1, UP-2, UD-A, UD-B, UD-C mode) ........................................... 52
7.5.3 When PRESET 1 is larger or equal than PRESET 2 at at down mode ..... 53
7.6 Prescale .......................................................................................................... 54
8 Timer Mode ................................................................................................ 55
8.1 Parameter setting ............................................................................................ 55
8.2 Output mode .................................................................................................... 57
8.3 Timer operation for indicator model ................................................................. 65
8.4 Timer ‘0’ Time Setting ...................................................................................... 68
8.4.1 Available output mode to set ‘0’ time setting .............................................. 68
8.4.2 Operation by each output mode (‘0’ time setting) ...................................... 68
9 Factory Default .......................................................................................... 75
9.1 Common .......................................................................................................... 75
9.2 Counter ............................................................................................................ 75
9.3 Timer ............................................................................................................... 76

Autonics CT6Y-2P series Specifications

General

Brand	Autonics
Model	CT6Y-2P series
Category	Timer
Language	English