Autonics TK4S - Setting Group Descriptions and DAQMaster; Parameter Group Details [PAR1-PAR5]

7 Setting Group Parameter Description
© Copyright Reserved Autonics Co., Ltd. 109
7 Setting Group Parameter
Description
7.1 Setting Group [ SV ]
Parameter Description Setting Range Unit
Factory
Default
SV
Set Value SV
Between
L-SV
and
H-SV
℃/℉
/-
0
▼+▲
Key
Digital Input Key
Execute
Digital input
execution key.
Press ▼and ▲
Keys more than 1
second.
- -
A/M
Key
Auto_Manual
Monitoring/Contr
ol
MV
monitoring/manual
control execution
key.
Press A/M key
more than 1
second.
- -
INIT
Parameter
Initialize
Resets parameters
to factory defaults.
NO
/
YES
-
NO
7.2 MV Monitoring/Manual Control Setting
Group [ MV ]
Parameter Description Setting Range Unit
Factory
Default
H-MV
Heating_MV Heating MV
H 0.0
to
H100
% -
C-MV
Cooling_MV Cooling MV
C 0.0
to
C100
% -
※It is possible to manually control and monitor heating and cooling MVs at the same time.