Autonics TX4S Series - Absolute Value High Limit Alarm; Absolute Value Low Limit Alarm; Sensor Break Alarm; Loop Break Alarm

A %
Absolute value high
limit alarm
OFF H O PV SV
90℃ 100℃ Alarm
absolute-value: Set as 90℃
OFF H ON
SV PV
100℃ 110℃
Alarm absolute-value: Set as
110℃
If PV is higher than the absolute
value, the output will be ON.
A ^
Absolute value low
limit alarm
ON H OFF
PV SV
90℃ 100℃
Alarm absolute-value: Set
as 90℃
ON H OFF
SV PV
100℃ 110℃
Alarm absolute-value: Set as
110℃
If PV is lower than the absolute
value, the output will be ON.
SBa Sensor break alarm –
It will be ON when it detects sensor
disconnection.
LBa Loop break alarm –
It will be ON when it detects loop
break.
H: Alarm output hysteresis [AHYS]
Alarm option :