877. 250.7729 | feeder-robot.com877. 250.7729 | feeder-robot.com
18 19
AutoPets Connect App
Installing the AutoPets Connect App
1. Press the Power button to turn the Feeder-Robot on.
2. Download the AutoPets Connect app from the App Store or
Google Play.
3. Make sure Bluetooth is enabled on your mobile device.
4. Put the Feeder-Robot into onboarding mode: Apply a 3-second
press to the Connect button on the Feeder-Robot Control Panel.
5. The onboarding light will blink yellow to show that onboarding is
in progress. Follow the prompts in the app and scan the QR code
on the back of the unit as directed.
6. Once the Feeder-Robot is successfully connected to WiFi, the
onboarding light on the Control Panel will display a solid blue light.
7. If onboarding fails, you will be prompted to retry or cancel. If you
retry, the process is started over.
8. Once you have successfully onboarded, select the
Feeder-Robot unit on the home screen and click “Schedule”
in the bottom menu of the app to set up your first feeding
schedule.
● Press and hold the Feed button for about 3 seconds to enter or
exit Control Panel Lockout. The Status Light will flash white to
confirm status.
● While in Control Panel Lockout, you can still turn the unit off by
pressing and holding the Power button for 3 seconds.
The AutoPets Connect App offers customizable programming
options for your pet’s mealtime needs from the convenience of
your phone. You can monitor and control your pet’s feeding habits,
receive notifications for when you’re getting low on food, get feeding
insights by comparing weekly and monthly stats, and more.
Dispensing Missed Meals
In the event the Feeder-Robot misses a scheduled feeding because
it was powered off, you will know whether the feeder is going to
dispense the missed meal once it is powered back on:
If powered off/on via the Power button, the Feeder-Robot will not
feed any missed meals when powered back on.
If powered off from a power outage or being unplugged from the
wall, the Feeder-Robot will dispense only the last meal it missed
when power is returned. Any other missed meals, while off, will be
wiped from the queue.
Control Panel Lockout
Control Panel Lockout disables button functions to prevent unwant-
ed changes. The Feeder-Robot functions normally in Automatic
Feeding Mode during Control Panel Lockout.
To Next Page
Loading...
