Page - 3
l
l
l
l
While the recommended level of salt for your AutoPilot
®
product should not damage your equipment,
excessively high chlorine levels can cause corrosion damage to pool fixtures and equipment. Consult
your pool professional for equipment selection, proper use and maintenance of these products.
For maximum cell life, maintain water in a balanced condition. Water maintained in a scaling condition
will shorten cell life and may render the AutoPilot
®
chlorinator inoperative. Damage and/or service calls
caused by improper water balance, is NOT covered under the equipment warranty. See "Water Balance
and Chemistry Recommendations" on page 9 for more information.
Scraping or scratching the titanium blade’s edge or surface will damage the blade coating and cause
premature failure of the cell. Never use any sharp or metallic objects to remove scale. The warranty will
be voided. See "Cleaning the Cell" on page 17 for instructions on how to properly clean the cell.
The ChlorSync
®
reverse polarity times are factory set and can only be changed by using the PoolSync
TM
option. Reduced polarity reversing cycle times will reduce cell life and should only be used due to
uncontrollable scale formation on the cell. ALWAYS test and adjust water balance before attempting
scale control via shortening reverse period.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
