UPGRADE, UPDATE, SPECIFICATIONS (CONT.)
Page 30
1. Press CONFIG from the initial screen.
2. Use the pand qkeys to display
4-Download on the screen, then
press
ENTER.
3. Press ENTER to prepare the EZ-Read to receive the down-
load.
• When the screen displays a Downloading message, the
EZ-Read is in Slave
Mode waiting for the PC to begin communication.
System Information
NOTE: Press CONFIG at any time during the following steps
to display the initial screen.
1. Press CONFIG from the initial screen.
2. Use the pand qkeys to display 5-System Info on the
screen, then press
ENTER.
3. Software Version information will be displayed on the screen.
Press
ENTER to view the next screen.
4. The EZ-Read Serial Number will be displayed on the
screen. Press
ENTER to view the next screen.
5. The EZ-Read software ID#1 and ID#2 hex-codes will be dis-
played on the screen. Press
ENTER to display the
initial screen.
To Next Page
Loading...