displayed, then press ENTER.
3. Use the pand qarrow keys to select 2-Capture Time,
then press
ENTER.
4. Use the tand uarrow keys to change Capture Time to
the desired number between 500 and 5000 ms, then press
ENTER to select the choice (or press the CONFIG Key
to Cancel and return to the initial screen).
NOTE: 500 milliseconds is one-half a second, 1000 milliseconds
is 1 second, and 5000 milliseconds is 5 seconds.
OBD-I
Page 58
UPGRADE, UPDATE, SPECIFICATIONS (CONT.)
To Next Page
Loading...