9
4. Function and Control
4-1 H-Style
1) Remote Controller Introduction
➢ Introduction for Buttons on Remote Controller
1. ON/OFF
* Press this button to turn on/off the unit.
* This will clear the existing timer and SLEEP settings.
2.℃/℉
* Press this button to set the temperature display to Fahrenheit, which is displayed by
default in Celsius. The “℃” will not be displayed on the LCD.
* Press this button again to restore the temperature display to Celsius.
Note: Temperature display in Fahrenheit is not available for some models. When
temperature is displayed in Fahrenheit on the remote controller, it might be in Celsius
on the unit, the function and operation of which will not be affected.
3. SPEED
* Press this button, you can select the motor speed as follows:
Low → Mid → High → Auto
Note: AUTO air speed is not available in Fan mode.
4. DISPLAY
* Press this button to turn on/off the display. This is for the convenience of users who
are unconformable sleeping with the backlight on.
5. iFEEL
* Press this button to set the temperature display on the remote controller to ambient
temperature and press this button again to set it to preset temperature.
6. TIMER
* With the unit ON, press this button to set OFF timer or with it OFF to set ON timer.
Note：
All the figures above are the
displays after being initially
electrified or re-electrified after
power off. In actual operations,
the remote controller screen
displays related items only.
Some functions are optional
and don’t work according to
the model.
To Next Page
Loading...
Need help?
General
