AVA WEIGH 334BS30 - Indicator Display; Indicator Display Elements

6.
INDICATOR DISPLAY
PRINT
FUNC
ACC
TOTAL
UNIT
DATA
ZERO
ON/OFF
TARE
PRESET
SETUP
334BS30
Capacity: 30lb x 0.01lb / 15kg x 0.005kg
Legal for Trade
• - Scale is zeroed, gross weight is 0, tare is 0.
• - Scale is stable.
• NET - Display reading is net weight; tare is not 0.
• Total - Display data is accumulated total mes, weight, pieces, or percentage.
• Hold - Scale is in dynamic weighing mode.
 -Holdashes
actual uctuang weight displayed.
 -Holdsolid
locked weight is displayed.
• Peak- Scale is in dynamic weighing mode. Hold type is PEAK-HOLD
• lb - Measure unit is lb or lb:oz
• oz - Measure unit is oz or lb:oz
• kg - Measure unit is kg
• % - Measure unit is % (in % weighing mode).
• Pcs- Measure unit is pieces (in counng mode).
• - Baery level
• HI - Data compare (check-weighing) is enabled.
Current data (weight, pieces, or percent) is above the specied upper limit.
• OK - Data compare is enabled.
Current data is between the specied upper and lower limits.
• LO - Data compare is enabled.
Current data is below the specied lower limit.