AVA WEIGH 334PCS40 - Keypads

334PCS40
WEIGHT
ZERO NET
PRINT AC CHARGE
UNIT PRICE
WEIGHT
ZERO NET
UNIT PRICE
TOTAL PRICE
(
$
)
PRINT AC CHARGE
TOTAL PRICE
(
$
)
Capacity: 40lb. x 0.01lb. / 20kg x 0.005kg
Legal for Trade
2
0
7
8 9
4
5
6
1
3
TUV
WXYZ
JKL
MNO PQRS
ABC DEF GHI
ALT GR
M1 M2 M3
TARE
ZERO
M4 M5
SAVE
RC.
PLU
ST.
PLU
UNIT
ENTER
CLEAR
PRINT
kg lb oz
SAVE
$/kg $/lb $/oz
kg lb oz SAVE $/kg $/lb $/oz
KEYPADS
5.
334PCS40
334PCS40T
M6 M7 M8 M9 M10 M11 M12 M13 M14 M15
M16 M17 M18 M19 M20 M21 M22 M23 M24 M25
M26 M27 M28 M29 M30 M31 M32 M33 M34 M35
M36 M37 M38 M39 M40 M41 M42 M43 M44 M45
M46 M47 M48 M49 M50 M51 M52 M53 M54 M55
334PCS40T
2
0
7
8 9
4
5
6
1
3
TUV
WXYZ
JKL
MNO PQRS
ABC DEF GHI
ALT GR
M1 M2 M3
TARE
ZERO
M4 M5
SAVE
RC.
PLU
ST.
PLU
UNIT
ENTER
CLEAR
PRINT
Capacity: 40lb. x 0.01lb. / 20kg x 0.005kg
WEIGHT
NETZERO
kg lb oz
SAVE
PRINT AC CHARGE
$/kg $/lb $/oz
UNIT PRICE
TOTAL PRICE
(
$
)
Legal for Trade
• 0-9: Numeric keys, used to enter numerical data
or leers
• M1-M5: Direct PLU keys, used to directly recall
the stored unit price
• M6-M55: Direct PLU keys, used to directly recall
the stored unit price (334PCS40T only)
• CLEAR: Clears the recorded data
• ENTER: Conrms the operaon or entered data
• SAVE: Saves the tare weight and unit price,
so that the data will not be cleared aer one
weighing operaon
• ZERO: Sets the zero point aer the scale is stable.
The range is “power-on zero point±1.5%FS
• TARE: Zeros out the weight. When the total
weight is 0, tare weight is cleared, NET indicator is
o.
• ST.PLU: Ready to enter indirect store mode (PLU)
• RC.PLU: Ready to enter indirect recall mode (PLU)
• PRINT: Outputs the data when RS232 hardware is
aached
• UNIT: Switches the unit of price & weight
• ON/OFF: When the display is o, press key to turn
on the scale. When the display is on, press and
hold key for 3 seconds to turn o the scale. To exit
current mode, press key.
• ON/OFF+0: Enters business’s name setup mode
• ON/OFF+1: Enters LCD contrast setup mode
• ON/OFF+2: Enters auto-o me setup mode
• ON/OFF+3: Displays A/D inner code or working
voltage
• ON/OFF+4: Enters RS232 parameters setup mode
• ON/OFF+5: Enters date and me setup mode
• ON/OFF+6: Enters ID setup mode
• ON/OFF+7: Enters 0S2130D back feed setup
mode (if “232.out” is set to HOST, this seng is
invalid)
• ON/OFF+8: Enters 0S2130D origin setup mode (if
“232.out” is set to HOST, this seng is invalid)