AVA WEIGH 334PCSP30 - System Setup; Set Menu Items

SYSTEM SET UP
14.
That operation can be lock by password. The password is set in PC and can be changed at anytime.
Set menu items as below:
• @ IP address: set IP address of label scale
•  / Subnet mask: set the subnet mask of the scale
•  /  Gateway: set the gateway of the scale
• D Print density set: press  /  to select 0~7,from low to high, total 8 levels
• V Print speed set: press  /  to select 0~7, from fast to slow, total 8 levels
• S Select paper type: press  /  to select 0~1, total 2 types: 0:label,1:Receipt (small ticket)
• A Paper position fine-tuning: press  /  to select -8~+8 , total 17 offset, adjust to most
suitable starting position
•  Label style selection: D0 or D1 tag with / style 
• T Date adjusting: set current date and time
• N 
•  Whether to print weight unit: select to print weight unit or not
•  Whether to print price unit: select to print price unit or not
• J Decimal digits in unit price: set decimal digits in unit price
•  Set default barcode type: set barcode type.(0~99, the details refer to appendix two in
software user manual)
• X Total price precision: set total price precision(1: N.N0, 2: N.NN, 3: N.N)
• Total price carry set: set carry value.(for example round, that is 5)
• W Print time: set print time or not.(time format is hour and minute)
• Y 
• G Use after discount price or not: set barcode to print after discount price or not
•  Display items in weight field: set 0: weight, 1: quantity
• Q Print delete line mark: set 0: print, 1: not
•  Select barcode width: 0: wide, 1: narrow
• E The supplementary of default information 1 :0 means not default information1
• F The supplementary of default information 2 :0 means not default information2
• Discount goods belong to special department: setting if discount goods belong to special
department or not
• R IP setting on the host machine: using this scale as the host machine to set IP address, to
connect other scales
• P Statistics function mode: Choosing “yes” or “not ” to open statistics function mode for sales
goods
1. Press [set] button and hold on 3s to enter system setting status.
2. Press  or or direct number key accordingly to select item.
3. Press [PRN/ENTER] button to confirm.
NOTE: In menu, 0=not, 1=yes, if others, will note.