15.
• Running account overflowing alarm: Set alarm when the running account overflows
• Summation printing: print summation label, total amount/total quantity/quantity of total
label(clicking twice (set) to set)
• Sum all quantity of single goods’ label: print all information of all sales goods((clicking twice
(set) to set))
• Clear all the summation data: clean up all the summation data((clicking twice (set)to set))
• Fine tuning of paper-out position: adjust paper's offset value: 0~16
• Z Zero print: whether to start zero print price tag
• Print test page: printing self test page or not
• Auto print: Whether the default setting is auto print when power on
• Cover sensor on/ off: Whether to turn off the paper pickup detection function
• Cover sensor AD: Paper pickup detection sensor, intelligent judgment or manual setting
(31-253)
• Print page number: Set whether to print the label page number or not
• Set print barcode type: set all barcode types for printing
• LED backlight: Use to select LED backlight brightness 0~4 from high to low, Five
different brightness levels in total
• Open num + amt print or not: Enter the number and total price to print a label immediately.
•
• Sleep time: set the time for automatically turning off the screen when the scale has no
operation
• Set the number of copies: Set the default number of labels to be copied when the copy
button is pressed (0 means off)
• Head input: Set the slogan displayed when the screen is idle
• Receipt PLU name align: set the alignment of the product name when printing the receipt
(left, middle, right alignment)
• Close show time: Turn off the time display when the scale is not operating
• Edit barcode department: Set the department number in the barcode
• EAN13 1st digit at outside: Whether the first digit of the EAN13 barcode is placed outside
• Recover factory system para: Whether to restore the factory settings
• SET WIFI: Set WIFI SSID, WIFI Encryption and WIFI password
• About: View the device model and version number
To Next Page
Loading...
