Avantco 178APT27HC - Minimum Temperature Limit (r1); Maximum Temperature Limit (r2)

5
Temperature
Controller Settings
/C1= Probe 1 differential
-50.0° to 50.0°;
Default = 0° (Fig. 4)
Use up or down arrow to change, then press
"Set" button to keep the option.
/C2 = Probe 2 differential
(Not used on Refrigerators)
(Fig. 5)
rd = Set temperature differential
0°F to 19°F is adjustment range
Default = 5°F (Fig. 6)
Use up or down arrow to change, then press
"Set" button to keep the option.
r1 = Minimum set temperature allowed
-50°F to r2
Default = 33°F (Fig. 7)
Use up or down arrow to change, then press
"Set" button to keep the option.
r2 = Maximum set temperature allowed
r1 to 200°
Default = 43° (Fig. 8)
Use up or down arrow to change, then press
"Set" button to keep the option.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8