Avaya 1400 Series - Phone Self Test; A-Menu Auto Exit

IP Office Basic Edition 1400 Series Phone User Guide Page 71
- Issue 7a (30 January 2014)IP Office Basic Edition
Phone Settings: Phone Self Test
8.16 Phone Self Test
The self test function allows you to check whether each button on the phone is working.
To erase (reset) the A menu options: (1408/1416)
1.Press the MENU button.
2.Use the up and down arrow keys to locate the option Advanced. Press the Select soft key.
3.Use the up and down arrow keys to locate the option Self Test. Press the Select soft key.
4.A summary of the software being run by the phone is displayed.
5.Press and hold the Test soft key. The lamps on all the buttons with lamps are lit. The whole display is black.
6.Release the Test soft key to end the self test.
7.When completed, press the Done soft key.
8.Press the Exit soft key to exit the menus.
To erase (reset) the A menu options: (1403)
1.Press the MENU button.
2.Press # until Advanced is displayed.
3.Press # until Self Test is displayed. Press * to select.
4.Press and hold the Test soft key. The lamps on all the buttons with lamps are lit. The whole display is black.
5.Release the Test soft key to end the self test.
8.17 A-Menu Auto Exit
The Show Phone Screen option only applies to the A-menu screens accessed when you press the key. If the option
is on, if you receive a call while in the A-menu, the phone will automatically exit the menus and display the call details.
To turn show phone screen on/off: (1408/1416)
1.Press the MENU button.
2.Use the up and down arrow keys to locate the option Call Settings.... Press the Select soft key.
3.Use the up and down arrow keys to locate the option Show Phone Screen.
4.Use the left and right arrow keys or press the On/Off soft key to change the setting.
5.When completed, press the Done soft key.
6.Press the Exit soft key to exit the menus.