Avaya 1403 - About Leds

1403/1603 Phone Page 9
15-601013 Issue 02c (02 February 2010)IP Office Release 6
1403, 1603: Important Safety Information
1.2 About LEDs
Each call/line appearance button and feature button has two LEDs, one green and one red, to indicate the status of the
call/line appearance or feature. The status is identified by whether the LED is turned on, off, or blinking as described in
the following tables.
Table 1. Call/Line Appearance Button LEDs
LED
Description
Steady green
Call/line appearance is active.
Slow blinking green
Call/line appearance is ringing.
Fast blinking green
Call/line appearance is on hold.
Very fast blinking green
Conference or Transfer is pending.
Steady red
Call/line appearance is selected and will be used when you go off-hook. It remains steady
red while you use the call/line appearance.
Off
Call/line appearance is available.
Table 2. Feature Button LEDs
LED
Description
Steady green
Feature is active.
Blinking green
Feature is pending (request is being processed and not immediately available).
Off
Feature is not active.