Avaya 1600 Series - Page 81

Link Layer Discovery Protocol (LLDP)
Issue 5 April 2010 81
TIA LLDP MED Extended
Power-Via-MDI
Power Value = 0 if the telephone is not
currently powered via PoE, else the
maximum power usage of the telephone plus
all modules and adjuncts powered by the
telephone in tenths of a watt.
TIA LLDP MED Network Policy Tagging Yes/No, VLAN ID for voice, L2 Priority,
DSCP Value.
TIA LLDP MED Inventory – Hardware
Revision
MODEL - Full Model Name.
TIA LLDP MED Inventory – Firmware
Revision
BOOTNAME.
TIA LLDP MED Inventory – Software
Revision
APPNAME.
TIA LLDP MED Inventory – Serial
Number
Telephone serial number.
TIA LLDP MED Inventory –
Manufacturer Name
Avaya.
TIA LLDP MED Inventory – Model
Name
MODEL with the final Dxxx characters
removed.
Avaya Proprietary PoE Conservation
Level Support
Provides Power Conservation abilities/settings,
Typical and Maximum Power values.
OUI = 00-40-0D (hex), Subtype = 1.
Avaya Proprietary Call Server IP
Address
Call Server IP Address.
Subtype = 3.
Avaya Proprietary IP Phone Addresses Phone IP Address, Phone Address Mask,
Gateway IP Address.
Subtype = 4.
Avaya Proprietary CNA Server IP
Address
CNA Server IP Address = in-use value from
CNASRVR.
Subtype = 5.
Avaya Proprietary File Server File Server IP Address.
Subtype = 6.
Table 10: LLDPDU Transmitted by the 1600 Series IP Telephones (continued)
Category TLV Name (Type) TLV Info String (Value)
2 of 3