Avaya 3500 series - Console Port Pin Assignments

Model Input current Input voltage
(rms)
Power consumption Thermal rating
3510GT Maximum 0.18 A 100–240 VAC at
50–60 Hz
Maximum 18 W 61Btu/h
maximum
3510GT-PWR+ Maximum 2.1 A 100–240 VAC at
50–60 Hz
Maximum 210 W 156 Btu/h
maximum
3524GT Maximum 0.28 A 100–240 VAC at
50–60 Hz
Maximum 28.5 W 95 Btu/h
maximum
3524GT-PWR+ Maximum 5.0 A 100–240 VAC at
50–60 Hz
Maximum 475 W 357 Btu/h
maximum
3526T Maximum 0.28 A 100–240 VAC at
50–60 Hz
Maximum 28.5 W 95 Btu/h
maximum
3526T-PWR+ Maximum 5.0 A 100–240 VAC at
50–60 Hz
Maximum 473 W 350 Btu/h
maximum
3549GTS Maximum 0.71 A 100–240 VAC at
50–60 Hz
Maximum 65 W 223 Btu/h
maximum
3549GTS-PWR+ Maximum 4.91 A 100–240 VAC at
50–60 Hz
Maximum 484 W 424 Btu/h
maximum
3550T Maximum 0.83 A 100–240 VAC at
50–60 Hz
Maximum 35 W 118 Btu/h
maximum
3550T-PWR+ Maximum 6.8 A 100–240 VAC at
50–60 Hz
Maximum 504 W 456 Btu/h
maximum
AC power cord specifications
To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table, also see the following table for plug specifications.
Console port pin assignments
Console port establishes a management terminal connection to the switch.
You can use an RJ-45 to DB-9 cable to connect the switch console port to your management
terminal. Avaya recommends you use the Avaya RJ-45. Alternatively a DB-9 to RJ-45 adapter or
other suitable console cables can be used - the maximum length of a console cable is 25 feet (8.3
meters). The following table describes the RJ-45 console port pin-out information. You can use the
pin-out information to verify or create a console cable for use with your maintenance terminal.
Installing the Avaya Ethernet Routing Switch 3500 Series
September 2016 Installing Avaya Ethernet Routing Switch 3500 Series 44
Comments on this document? infodev@avaya.com